WILCOX WSM 01 MAGNETIC SENSOR
Ingeniería WILCOX has developed a new magnetic sensor based on the operation of a reed switch with special magnetic features which ensure its smooth operation at a longer distance, thus resulting in a convenient product to use in the positioning of elevators, even in case of distance variations due to the free movement of links.
Its low cost combined with its excellent features
Sensor: reed switch.
Contacts: open normal.
Nominal scanning: 15 mm with WIA actuator.
Maximum detection range: 35 mm with WIA actuator.
(this feature varies in the presence of ferrous)
Maximum switching current: 50 mA resistive charge.
Maximum switching voltage: 30 V.c.c
Case color: ABS orange color.
Length: 130 mm.
Diameter: 13 mm.
Support: two one-eyed plastic screw on the body.
Cable length: 1,5 mts
Use as active (three conductors).
Supply voltage: 6 V.c.c a 24 V.c.c
Signage: LED on the back on the presence of the magnet actuator.
Note: WSM Sensor 01, the brackets and magnets WIA actuators are supplied separately.
WSM 01 electrical diagram.
WILCOX WIA7.5 Y WIA15 ACTUATOR MAGNET
Ingeniería WILCOX has developed its own magnet to be used with the WSM 01 magnetic sensors. Its special magnetic features ensure its smooth operation at a longer distance, thus resulting in a convenient product to use in the positioning of elevators, even in case of distance variations due to the free movement of links.
Its low cost combined with its excellent features makes it ideal for fitting in autonomous indicators and in one- and two-speed maneuvering units.